-17%
RED LAMBDA T3 HEAT NOT BURN TOBACCO HEATING DEVICE RED Lambda T3 is a solid device that offers 18-20 consecutive uses, temperature adjustment, and automatic cleaning. It's a suitable device, but the price is a bit too high. Once you’ve unboxed your device, you can check the charge. To do so, just click on the control button once. The color of the light will correspond to a battery charge. White means 100-30% charge remaining, yellow means 30-1% remaining, red means 0% remaining. Charging time for T3 is very convenient at only 1 hour and 15 minutes. How To Use RED LAMBDA T3 Set temperature Press and hold the temperature control button the color of the temperature control button light indicates the set temperature white = low yellow = high Insert the HeatStick Press and hold the control button to turn on The device will vibrate, and the light will begin flashing to show that the heating has started heating takes approximately 25 seconds The device will vibrate, and the light will turn solid when heating is done, and the device is ready to use a cycle lasts 5.5 minutes or 16 puffs When the cycle is over, the device will vibrate, and the light turns off Remove the Heat Stick by pushing the cap up and pulling the Heat Stick out For good device health, make sure you clean your RED Lambda T3 device often. You can clean with the automatic cleaning feature or manually. To use the automatic cleaning feature, click the control button 5 times. Automatic cleaning will take approximately 30 seconds. To manually clean, wait until the device is cool then remove the cap from the body of the device and use either the cleaning brush or the cleaning sticks to wipe away any grime and build-up left in the Heat Sticks heating chamber. What’s Included 1 x LAMBDA T3 Device 1 x Cleaning Brush Cleaning Stick 1 x USB Cable 1 x User Manual RED LAMBDA T3 Specs & Features  Heating Type: Titanium Steel Alloy Heating Blade Battery Capacity: 1500 mAh Charging Time: About 70 mins Input Voltage: 5V / 2A Smoking Time: 5.5 mins or 16 Puffs (14+2 Puffs) Product Size: 100.5*31*16.2 mm Weight: 69 g Material: Aluminum Alloy+PPSU+PEEK Compatible With: All Heets Sticks Temperature adjustment, automatic cleaning. Tempered glass side panels QUICK LINK Lambda i8 WhiteDevice for Terea Heets Sti
Click to enlarge

RED LAMBDA T3 HEAT NOT BURN TOBACCO HEATING DEVICE

Original price was: 300 AED.Current price is: 250 AED.

2 People watching this product now!

Free Delivery Available

Order more than 400 AED and enjoy Free Delivery All Over UAE including Dubai, Ajman, Sharjah, and Abudhabi.

1 Hour Delivery

1 Hour delivery in Dubai , AJman , Sharjah . and 24 Hour delivery in all over UAE

Payment Methods: Cash On Delivery

Compare
Add to wishlist

Description

RED LAMBDA T3 HEAT NOT BURN TOBACCO HEATING DEVICE

RED Lambda T3 is a solid device that offers 18-20 consecutive uses, temperature adjustment, and automatic cleaning. It’s a suitable device, but the price is a bit too high. Once you’ve unboxed your device, you can check the charge. To do so, just click on the control button once. The color of the light will correspond to a battery charge. White means 100-30% charge remaining, yellow means 30-1% remaining, red means 0% remaining. Charging time for T3 is very convenient at only 1 hour and 15 minutes.

How To Use RED LAMBDA T3

  1. Set temperature
    • Press and hold the temperature control button
    • the color of the temperature control button light indicates the set temperature
      • white = low
      • yellow = high
  2. Insert the HeatStick
  3. Press and hold the control button to turn on
  4. The device will vibrate, and the light will begin flashing to show that the heating has started
    • heating takes approximately 25 seconds
  5. The device will vibrate, and the light will turn solid when heating is done, and the device is ready to use
    • a cycle lasts 5.5 minutes or 16 puffs
  6. When the cycle is over, the device will vibrate, and the light turns off
  7. Remove the Heat Stick by pushing the cap up and pulling the Heat Stick out

For good device health, make sure you clean your RED Lambda T3 device often. You can clean with the automatic cleaning feature or manually. To use the automatic cleaning feature, click the control button 5 times. Automatic cleaning will take approximately 30 seconds. To manually clean, wait until the device is cool then remove the cap from the body of the device and use either the cleaning brush or the cleaning sticks to wipe away any grime and build-up left in the Heat Sticks heating chamber.

 

RED LAMBDA T3 HEAT NOT BURN TOBACCO HEATING DEVICE RED Lambda T3 is a solid device that offers 18-20 consecutive uses, temperature adjustment, and automatic cleaning. It's a suitable device, but the price is a bit too high. Once you’ve unboxed your device, you can check the charge. To do so, just click on the control button once. The color of the light will correspond to a battery charge. White means 100-30% charge remaining, yellow means 30-1% remaining, red means 0% remaining. Charging time for T3 is very convenient at only 1 hour and 15 minutes. How To Use RED LAMBDA T3 Set temperature Press and hold the temperature control button the color of the temperature control button light indicates the set temperature white = low yellow = high Insert the HeatStick Press and hold the control button to turn on The device will vibrate, and the light will begin flashing to show that the heating has started heating takes approximately 25 seconds The device will vibrate, and the light will turn solid when heating is done, and the device is ready to use a cycle lasts 5.5 minutes or 16 puffs When the cycle is over, the device will vibrate, and the light turns off Remove the Heat Stick by pushing the cap up and pulling the Heat Stick out For good device health, make sure you clean your RED Lambda T3 device often. You can clean with the automatic cleaning feature or manually. To use the automatic cleaning feature, click the control button 5 times. Automatic cleaning will take approximately 30 seconds. To manually clean, wait until the device is cool then remove the cap from the body of the device and use either the cleaning brush or the cleaning sticks to wipe away any grime and build-up left in the Heat Sticks heating chamber. What’s Included 1 x LAMBDA T3 Device 1 x Cleaning Brush Cleaning Stick 1 x USB Cable 1 x User Manual RED LAMBDA T3 Specs & Features  Heating Type: Titanium Steel Alloy Heating Blade Battery Capacity: 1500 mAh Charging Time: About 70 mins Input Voltage: 5V / 2A Smoking Time: 5.5 mins or 16 Puffs (14+2 Puffs) Product Size: 100.5*31*16.2 mm Weight: 69 g Material: Aluminum Alloy+PPSU+PEEK Compatible With: All Heets Sticks Temperature adjustment, automatic cleaning. Tempered glass side panels QUICK LINK Lambda i8 WhiteDevice for Terea Heets Sti

What’s Included

  • 1 x LAMBDA T3 Device
  • 1 x Cleaning Brush
  • Cleaning Stick
  • 1 x USB Cable
  • 1 x User Manual

RED LAMBDA T3 Specs & Features 

  • Heating Type: Titanium Steel Alloy Heating Blade
  • Battery Capacity: 1500 mAh
  • Charging Time: About 70 mins
  • Input Voltage: 5V / 2A
  • Smoking Time: 5.5 mins or 16 Puffs (14+2 Puffs)
  • Product Size: 100.5*31*16.2 mm
  • Weight: 69 g
  • Material: Aluminum Alloy+PPSU+PEEK
  • Compatible With: All Heets Sticks
  • Temperature adjustment, automatic cleaning.
  • Tempered glass side panels

QUICK LINK GOLD LAMBDA T3 HEAT NOT BURN TOBACCO HEATING DEVICE 

Customer Reviews

Reviews

There are no reviews yet.

Be the first to review “RED LAMBDA T3 HEAT NOT BURN TOBACCO HEATING DEVICE”

Your email address will not be published. Required fields are marked *

Related Products

-17%
BLACK LAMBDA T3 HEAT NOT BURN TOBACCO HEATING DEVICE BLACK Lambda T3 is a solid device that offers 18-20 consecutive uses, temperature adjustment, and automatic cleaning. It's a suitable device, but the price is a bit too high. Once you’ve unboxed your device, you can check the charge. To do so, just click on the control button once. The color of the light will correspond to a battery charge. White means 100-30% charge remaining, yellow means 30-1% remaining, red means 0% remaining. Charging time for T3 is very convenient at only 1 hour and 15 minutes. How To Use BLACK LAMBDA T3 Set temperature Press and hold the temperature control button the color of the temperature control button light indicates the set temperature white = low yellow = high Insert the HeatStick Press and hold the control button to turn on The device will vibrate, and the light will begin flashing to show that the heating has started heating takes approximately 25 seconds The device will vibrate, and the light will turn solid when heating is done, and the device is ready to use a cycle lasts 5.5 minutes or 16 puffs When the cycle is over, the device will vibrate, and the light turns off Remove the Heat Stick by pushing the cap up and pulling the Heat Stick out For good device health, make sure you clean your BLACK Lambda T3 device often. You can clean with the automatic cleaning feature or manually. To use the automatic cleaning feature, click the control button 5 times. Automatic cleaning will take approximately 30 seconds. To manually clean, wait until the device is cool then remove the cap from the body of the device and use either the cleaning brush or the cleaning sticks to wipe away any grime and build-up left in the Heat Sticks heating chamber. What’s Included 1 x LAMBDA T3 Device 1 x Cleaning Brush Cleaning Stick 1 x USB Cable 1 x User Manual BLACK LAMBDA T3 Specs & Features  Heating Type: Titanium Steel Alloy Heating Blade Battery Capacity: 1500 mAh Charging Time: About 70 mins Input Voltage: 5V / 2A Smoking Time: 5.5 mins or 16 Puffs (14+2 Puffs) Product Size: 100.5*31*16.2 mm Weight: 69 g Material: Aluminum Alloy+PPSU+PEEK Compatible With: All Heets Sticks Temperature adjustment, automatic cleaning. Tempered glass side panels QUICK LINK BLUE LAMBDA T3 HEAT NOT BURN TOBACCO HEATING DEVICE
Compare
Quick view
Add to wishlist

BLACK LAMBDA T3 HEAT NOT BURN TOBACCO HEATING DEVICE

Original price was: 300 AED.Current price is: 250 AED.
Add to cart
BLACK LAMBDA T3 HEAT NOT BURN TOBACCO HEATING DEVICE BLACK Lambda T3 is a solid device that offers 18-20 consecutive
-17%
GREEN LAMBDA T3 HEAT NOT BURN TOBACCO HEATING DEVICE GREEN Lambda T3 is a solid device that offers 18-20 consecutive uses, temperature adjustment, and automatic cleaning. It's a suitable device, but the price is a bit too high. Once you’ve unboxed your device, you can check the charge. To do so, just click on the control button once. The color of the light will correspond to a battery charge. White means 100-30% charge remaining, yellow means 30-1% remaining, red means 0% remaining. Charging time for T3 is very convenient at only 1 hour and 15 minutes. How To Use GREEN LAMBDA T3 Set temperature Press and hold the temperature control button the color of the temperature control button light indicates the set temperature white = low yellow = high Insert the HeatStick Press and hold the control button to turn on The device will vibrate, and the light will begin flashing to show that the heating has started heating takes approximately 25 seconds The device will vibrate, and the light will turn solid when heating is done, and the device is ready to use a cycle lasts 5.5 minutes or 16 puffs When the cycle is over, the device will vibrate, and the light turns off Remove the Heat Stick by pushing the cap up and pulling the Heat Stick out For good device health, make sure you clean your GREEN Lambda T3 device often. You can clean with the automatic cleaning feature or manually. To use the automatic cleaning feature, click the control button 5 times. Automatic cleaning will take approximately 30 seconds. To manually clean, wait until the device is cool then remove the cap from the body of the device and use either the cleaning brush or the cleaning sticks to wipe away any grime and build-up left in the Heat Sticks heating chamber. What’s Included 1 x LAMBDA T3 Device 1 x Cleaning Brush Cleaning Stick 1 x USB Cable 1 x User Manual GREEN LAMBDA T3 Specs & Features  Heating Type: Titanium Steel Alloy Heating Blade Battery Capacity: 1500 mAh Charging Time: About 70 mins Input Voltage: 5V / 2A Smoking Time: 5.5 mins or 16 Puffs (14+2 Puffs) Product Size: 100.5*31*16.2 mm Weight: 69 g Material: Aluminum Alloy+PPSU+PEEK Compatible With: All Heets Sticks Temperature adjustment, automatic cleaning. Tempered glass side panels QUICK LINK BLUE LAMBDA T3 HEAT NOT BURN TOBACCO HEATING DEVICE
Compare
Quick view
Add to wishlist

GREEN LAMBDA T3 HEAT NOT BURN TOBACCO HEATING DEVICE

Original price was: 300 AED.Current price is: 250 AED.
Add to cart
GREEN LAMBDA T3 HEAT NOT BURN TOBACCO HEATING DEVICE GREEN Lambda T3 is a solid device that offers 18-20 consecutive
-17%
BLUE LAMBDA T3 HEAT NOT BURN TOBACCO HEATING DEVICE BLUE Lambda T3 is a solid device that offers 18-20 consecutive uses, temperature adjustment, and automatic cleaning. It's a suitable device, but the price is a bit too high. Once you’ve unboxed your device, you can check the charge. To do so, just click on the control button once. The color of the light will correspond to a battery charge. White means 100-30% charge remaining, yellow means 30-1% remaining, red means 0% remaining. Charging time for T3 is very convenient at only 1 hour and 15 minutes. How To Use BLUE LAMBDA T3 Set temperature Press and hold the temperature control button the color of the temperature control button light indicates the set temperature white = low yellow = high Insert the HeatStick Press and hold the control button to turn on The device will vibrate, and the light will begin flashing to show that the heating has started heating takes approximately 25 seconds The device will vibrate, and the light will turn solid when heating is done, and the device is ready to use a cycle lasts 5.5 minutes or 16 puffs When the cycle is over, the device will vibrate, and the light turns off Remove the Heat Stick by pushing the cap up and pulling the Heat Stick out For good device health, make sure you clean your BLUE Lambda T3 device often. You can clean with the automatic cleaning feature or manually. To use the automatic cleaning feature, click the control button 5 times. Automatic cleaning will take approximately 30 seconds. To manually clean, wait until the device is cool then remove the cap from the body of the device and use either the cleaning brush or the cleaning sticks to wipe away any grime and build-up left in the Heat Sticks heating chamber. What’s Included 1 x LAMBDA T3 Device 1 x Cleaning Brush Cleaning Stick 1 x USB Cable 1 x User Manual BLUE LAMBDA T3 Specs & Features  Heating Type: Titanium Steel Alloy Heating Blade Battery Capacity: 1500 mAh Charging Time: About 70 mins Input Voltage: 5V / 2A Smoking Time: 5.5 mins or 16 Puffs (14+2 Puffs) Product Size: 100.5*31*16.2 mm Weight: 69 g Material: Aluminum Alloy+PPSU+PEEK Compatible With: All Heets Sticks Temperature adjustment, automatic cleaning. Tempered glass side panels QUICK LINK RED LAMBDA T3 HEAT NOT BURN TOBACCO HEATING DEVICE
Compare
Quick view
Add to wishlist

BLUE LAMBDA T3 HEAT NOT BURN TOBACCO HEATING DEVICE

Original price was: 300 AED.Current price is: 250 AED.
Add to cart
BLUE LAMBDA T3 HEAT NOT BURN TOBACCO HEATING DEVICE BLUE Lambda T3 is a solid device that offers 18-20 consecutive
-17%
GOLD LAMBDA T3 HEAT NOT BURN TOBACCO HEATING DEVICE GOLD Lambda T3 is a solid device that offers 18-20 consecutive uses, temperature adjustment, and automatic cleaning. It's a suitable device, but the price is a bit too high. Once you’ve unboxed your device, you can check the charge. To do so, just click on the control button once. The color of the light will correspond to a battery charge. White means 100-30% charge remaining, yellow means 30-1% remaining, red means 0% remaining. Charging time for T3 is very convenient at only 1 hour and 15 minutes. How To Use GOLD LAMBDA T3 Set temperature Press and hold the temperature control button the color of the temperature control button light indicates the set temperature white = low yellow = high Insert the HeatStick Press and hold the control button to turn on The device will vibrate, and the light will begin flashing to show that the heating has started heating takes approximately 25 seconds The device will vibrate, and the light will turn solid when heating is done, and the device is ready to use a cycle lasts 5.5 minutes or 16 puffs When the cycle is over, the device will vibrate, and the light turns off Remove the Heat Stick by pushing the cap up and pulling the Heat Stick out For good device health, make sure you clean your GOLG Lambda T3 device often. You can clean with the automatic cleaning feature or manually. To use the automatic cleaning feature, click the control button 5 times. Automatic cleaning will take approximately 30 seconds. To manually clean, wait until the device is cool then remove the cap from the body of the device and use either the cleaning brush or the cleaning sticks to wipe away any grime and build-up left in the Heat Sticks heating chamber. What’s Included 1 x LAMBDA T3 Device 1 x Cleaning Brush Cleaning Stick 1 x USB Cable 1 x User Manual GOLD LAMBDA T3 Specs & Features  Heating Type: Titanium Steel Alloy Heating Blade Battery Capacity: 1500 mAh Charging Time: About 70 mins Input Voltage: 5V / 2A Smoking Time: 5.5 mins or 16 Puffs (14+2 Puffs) Product Size: 100.5*31*16.2 mm Weight: 69 g Material: Aluminum Alloy+PPSU+PEEK Compatible With: All Heets Sticks Temperature adjustment, automatic cleaning. Tempered glass side panels
Compare
Quick view
Add to wishlist

GOLD LAMBDA T3 HEAT NOT BURN TOBACCO HEATING DEVICE 

Original price was: 300 AED.Current price is: 250 AED.
Add to cart
GOLD LAMBDA T3 HEAT NOT BURN TOBACCO HEATING DEVICE GOLD Lambda T3 is a solid device that offers 18-20 consecutive